GFG-8210 (10MHz)
Function Generator
FEATURESˇG
1. Frequency RangeˇG0.1Hz ~ 10MHz
2. WaveformsˇGSine, Triangle, Square, Ramp, TTL and CMOS Output
3. External Voltage Controlled Frequency (VCF) Function
4. Duty Cycle Control with Signal Inversion Capability
5. Variable DC Offset Control
6. Two-Step (-20dBx2) and Variable attenuator
7. Built-in 6 Digit Counter with INT/EXT Function up to
8. 150MHz / high resolution
9. LIN/LOG Sweep Mode
10. Sweep Output
10MHz GFG-8210 Specifications:
Main
Frequency Range 0.1Hz ~ 10MHz (8 ranges)
Amplitude >10Vp-p (into 50Ł[ load)
Impedance 50Ł[+10%
Attenuator -20dB+1dB x 2
DC Offset 5V( into 50Ł[ load)
Duty Control 15% : 85% : 15% to 1MHz Continue variable (square wave only)
Display 6 digits LED display
Sine Wave
Distortion 1% typical
Flatness + 0.45dB (+5%)
Triangle Wave
Linear >98% to 100kHz
Square Wave
Symmetry +2%, 1Hz ~ 100kHz
Rise or Fall Time < 35nS
CMOS Output
Max. Frequency 2MHz
Level <4Vpp ~ 14.5Vpp+0.5Vpp adjustable
Rise or Fall Time <120nS
TTL Output
Level >3Vpp
Rise or Fall Time <20nS
VCF
Input Voltage 0V~10V ˇÓ 1V(100 : 1)
Input Impedance 10kŁ[ ˇÓ10%
Sweep Operation
Sweep/Manual Switch selector
Sweep/Rate >100 : 1 ratio max. and adjustable
Sweep/Time 0.5sec. ~ 30sec. adjustable
Sweep/Mode Lin./Log. switch selector
Sweep/Out 0V ~ 10+1V
Frequency Counter
INT./EXT. Switch selector
Range 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.)
Accuracy Timebase accuracy ˇÓ1 count
Timebase ˇÓ20ppm (23˘XCˇÓ5˘XC) after 30 minutes warm up
Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
Input Impedance 1MŁ[//150pF
Power Source AC 115V/230VˇÓ15%, 50/60Hz
Accessories Power cord ˇŃ 1,
Instruction manual ˇŃ 1,
GTL-101 ˇŃ 2
Dimensions & Weight 251(W) ˇŃ 91(H) ˇŃ 291(D) mm, Approx. 2.2 kg